High Pressure Energy Saving 50hp 37kw High Speed Oil Free Turbo Air Suspension Blowers for Water Supply And Sewage
- Model
- AS-CZA
Item specifics
- After-sales service
- Support
- Guarantee period
- 3 Years
- Shipment packing
- Custom
- Brand
- AquaSust
- Rated Voltage
- 220V
- Power Source
- Electric Blower
- Color
- Customized Color
Review
Description
Aquasust High Speed Turbo Blower
Suspension high-speed centrifuge is a compressed air production system that appliesa number of technologies such as AirBearing,Impeller, Permanent MagnetSynchronous High Speed Motor, Inverter, Controller, Cooling System, ete. It is asingle-section centrifugal blower that is connected to a Permanent Magnet Synchro-nous Motor driven by an inverter.
Product Characteristics
1.Save Energy
(1)Save 20%~50% energy compared to existing products
(2)Can pay back the initial investment in a short period of time: 2-3 years
(3)Use of high speed operation and high efficiency design
(4)Minimizes mechanical losses through direct connection.
2.Easy To Install And Maintain
(1)Only the inhalation filter needs to be changed periodically
(2)Automatic detection and handling of error content function
(3)No special foundations or anchors are required because there is no vibration.
(4)Minimized installation time
3.Easy Operating
(1)Provides user-friendly interfaces
(2)Provides automatic operation modes as required in the field -Low noise and no vibration below 80dB
(3)Oil-free lubrication system
Core Technology
Original Imported Host
1.The host adopts Korea NAMWON TURBO ONE INC.
2.Stable performance and high efficiency of the mainframe
Suspended Bearing
1.Non-contact, virtually maintenance-free No vibration of bearings, very low noise.
2.Low influence of ambient temperature, dust, etc. Adequate start/stop durability guarantee
IMPELLER
1.Small operating range, high SURGE stability and full pressurization assurance
2.High strength, suitable for high temperature and high pressure severe working conditions.
Product Specification
High Speed Centrifuge Turbo Blower Parameter
Application Scenario
Textile mill printing and dyeing wastewater treatment
Paper industry wastewater treatment
Water treatment plant
High Speed Turbo Blower in Water Supply And Sewage Application
1. Water supply treatment:
●Aeration: In water supply treatment plants, high speed turbine blowers are commonly used in aeration systems to deliver oxygen to the water to promote the growth and activity of microorganisms in the water. This helps remove organic matter, nitrogen and other contaminants from the water and improves the quality of the water supply.
●Agitation: High-speed turbine blowers can also be used to agitate chemicals in the water, such as disinfectants, to ensure even distribution and improve treatment efficiency.
●Lifting: In some cases, high-speed turbo blowers can be used to lift water sources to ensure that water in a water supply system flows smoothly to where it is needed.
2. Wastewater Treatment:
●Aeration: In wastewater treatment plants, high speed turbo blowers are mainly used in aeration systems to promote the growth and activity of microorganisms in the wastewater by delivering oxygen to the wastewater, thereby accelerating the decomposition and degradation of organic matter.
●Stirring: Turbo blowers can be used to stir the sewage to prevent sludge deposition and to ensure that the microorganisms have full access to the organic matter, improving treatment efficiency.
●Gas conveying: In the process of sewage treatment, some gases may be produced, such as hydrogen sulphide, etc. High-speed turbo blowers can be used to extract these gases and dispose of them in order to reduce odour and environmental pollution.
3. Energy saving and emission reduction: Compared with traditional blowers, high-speed turbo blowers are usually able to operate at a higher efficiency, thus reducing energy consumption and carbon emissions, which contributes to energy saving, emission reduction and environmental protection.
FQA
Q: What are disc diffusers made of?
A: Disc diffusers are typically made of materials such as EPDM, silicone, or polyurethane. These materials are chosen for their durability and resistance to chemicals and UV radiation.
Q: How do you choose the right disc diffuser for a specific application?
A:The selection of a disc diffuser depends on factors such as the size of the treatment system, the oxygen demand of the water, and the type of wastewater being treated. A professional engineer or water treatment specialist can help determine the appropriate diffuser for a specific application.
Q:What are some common maintenance tasks for a disc diffuser?
A:Common maintenance tasks for a disc diffuser include cleaning the diffuser discs to remove accumulated debris, checking for leaks in the air supply system, and replacing damaged or worn discs.
