Maximize Performance high-speed centrifugal turbo blower for Sewage Treatment Plant
- Model
- AS-CZA
Item specifics
- After-sales service
- Support
- Guarantee period
- 3 Years
- Shipment packing
- Custom
- Brand
- AquaSust
- Rated Voltage
- 220V
- Power Source
- Electric Blower
- Color
- Customized Color
Review
Description
Aquasust High Speed Turbo Blower
Suspension high-speed centrifuge is a compressed air production system that appliesa number of technologies such as AirBearing,Impeller, Permanent MagnetSynchronous High Speed Motor, Inverter, Controller, Cooling System, ete. It is asingle-section centrifugal blower that is connected to a Permanent Magnet Synchro-nous Motor driven by an inverter.
Product Characteristics
1.Save Energy
(1)Save 20%~50% energy compared to existing products
(2)Can pay back the initial investment in a short period of time: 2-3 years
(3)Use of high speed operation and high efficiency design
(4)Minimizes mechanical losses through direct connection.
2.Easy To Install And Maintain
(1)Only the inhalation filter needs to be changed periodically
(2)Automatic detection and handling of error content function
(3)No special foundations or anchors are required because there is no vibration.
(4)Minimized installation time
3.Easy Operating
(1)Provides user-friendly interfaces
(2)Provides automatic operation modes as required in the field -Low noise and no vibration below 80dB
(3)Oil-free lubrication system
Core Technology
Original Imported Host
1.The host adopts Korea NAMWON TURBO ONE INC.
2.Stable performance and high efficiency of the mainframe
Suspended Bearing
1.Non-contact, virtually maintenance-free No vibration of bearings, very low noise.
2.Low influence of ambient temperature, dust, etc. Adequate start/stop durability guarantee
IMPELLER
1.Small operating range, high SURGE stability and full pressurization assurance
2.High strength, suitable for high temperature and high pressure severe working conditions.
Product Specification
High Speed Centrifuge Turbo Blower Parameter
Application Scenario
Textile mill printing and dyeing wastewater treatment
Paper industry wastewater treatment
Water treatment plant
High Speed Centrifuge Turbo Blower in Sewage Treatment Plant Application
1. Aeration: In the wastewater treatment process, high-speed turbine blowers are used in the aeration system to deliver oxygen to the wastewater to promote the growth of microorganisms and the degradation of organic matter. This helps to increase the efficiency and speed of wastewater treatment and ensures that organic matter is effectively removed from the wastewater.
2. Mixing and Stirring: The high-speed turbo blower can effectively stir the wastewater through the bubbles it produces, preventing sludge or other solid particles from being deposited at the bottom and keeping the sludge in suspension, ensuring that the microorganisms are able to fully come into contact with the organics, and improving the efficiency of wastewater treatment.
3. Gas transmission: In the process of wastewater treatment, some gases may be produced, such as hydrogen sulphide and so on. High speed turbine blowers can be used to extract these gases and send them to the gas treatment unit for treatment, thus reducing odour and environmental pollution.
4. Ventilation: Ventilation is very important in all parts of the treatment plant, such as the reactor and sludge thickening tank. High speed turbine blowers provide the necessary ventilation to keep the air in the system fresh and ensure the health and safety of staff.
5. Low Energy Consumption: Compared to traditional blowers or centrifugal fans, high speed turbo blowers are usually able to operate at higher efficiencies, which reduces energy consumption and saves energy costs.
FQA
Q: What are disc diffusers made of?
A: Disc diffusers are typically made of materials such as EPDM, silicone, or polyurethane. These materials are chosen for their durability and resistance to chemicals and UV radiation.
Q: How do you choose the right disc diffuser for a specific application?
A:The selection of a disc diffuser depends on factors such as the size of the treatment system, the oxygen demand of the water, and the type of wastewater being treated. A professional engineer or water treatment specialist can help determine the appropriate diffuser for a specific application.
Q:What are some common maintenance tasks for a disc diffuser?
A:Common maintenance tasks for a disc diffuser include cleaning the diffuser discs to remove accumulated debris, checking for leaks in the air supply system, and replacing damaged or worn discs.
