Stainless Steel Aeration Diffuser for Pulp And Paper Industry Wastewater Treatment
Stainless Steel Aeration Diffuser for Pulp And Paper Industry Wastewater Treatment
Model
SSDA12

Review

Description

Stainless Steel Aeration Diffuser


Stainless Steel Aeraton Diffuser is the latest design from Aquasust MBBR about water treatment, we are constantly developing new products to compete with the same industry, and in many ways we have set up a section with detailed product parameters for reference to help our customers save time.

Stainless Steel Aeration Diffuser Performance Parameters

Diffuser Type

Diffuser Length

Design Airflow

Net Operating Buoyancy
Hole Rooms
inch
mm

scfm
m3N/h
lb
kg
mm
SSDA12
12
300
0-28
0-48
2.12
0.96
3-6
SSDB12
12
300
0-26
0-44
2.0
0.91
3-6
SSDA24
24
600
0-51
0-87
4.19
1.9
3-6
SSDB24
24
600
0-41
0-80
4.0
1.82
3-6

Stainless Steel Aeration Diffuser Advantage


1.It is made of stainless steel The coarse bubble diffuser provides maximum aeration and mixing efficiency. The standard length of diffuser is 600 mm. A 600mm long diffuser can achieve a 1250mm air release circumference.It has a service life of over 15 years.

2.Strong durability: Stainless steel has excellent corrosion and abrasion resistance, which enables Aeraton Diffuser to maintain its function and appearance for a long time, and perform well even under harsh environmental conditions.

3. Excellent performance: The characteristics of stainless steel allow Aeraton Diffuser to have good gas diffusion performance, which can evenly distribute air or gas to ensure the efficient operation of the system.

4. Easy to clean: Stainless steel has a smooth surface that is relatively easy to clean. This makes it easier for maintenance personnel to keep the Aeraton Diffuser clean, ensuring its long-term effective operation.

5. Environmentally friendly: Stainless steel is a recyclable material, so Aeraton Diffuser has a low environmental impact. Choosing stainless steel helps to minimize waste of resources and is in line with the principles of sustainable development.

6. Exquisite appearance: Stainless steel has a lustrous appearance, which allows Aeraton Diffuser to add a sense of modernity and sophistication when in use. This not only enhances the aesthetics of the product, but also creates a better user experience.

Stainless Steel Aeration Diffuser in Pulp And Paper Industry  Wastewater Treatment Application


Pulp and paper industry wastewater contains large amounts of organic matter, suspended solids and other pollutants. Stainless steel aerators are used in these wastewater treatments as follows:

1. Organic matter removal: by increasing the concentration of dissolved oxygen and promoting the growth and metabolism of aerobic microorganisms, it effectively removes organic pollutants from wastewater and reduces COD and BOD.

2. Suspended solids treatment: through the rising effect of air bubbles, it helps to separate and remove suspended solids in wastewater and purify water quality.

3. Corrosion-resistant application: Stainless steel material can resist the erosion of corrosive chemicals in wastewater, prolonging the service life of the equipment and reducing maintenance costs.

4. System maintenance: Reduce system downtime and maintenance due to insufficient oxygen supply or equipment damage, ensure the continuity and stability of the wastewater treatment process.